Sensor Specifications

CMOS sensor

1280 x 960 pixels

18 µm pixel size

23 mm x 17.3 mm

12-bit depth

Sensor incorporates correlated double sampling (CDS)

CAR in 640 x 12 increments

EMVA 1288 measurements at 532nm

Standard Mode:

• Quantum Efficiency: 71.6% mono; 53.3% color
• Max. SNR: 40.7 dB
• AST (p) 19.8 mono; 24.2 color
• Saturation Capacity (e-): 11700 mono; 21024 color
• Temporal Dark Noise: 13.65 e-
• Dynamic Range: 58.3 dB

Binned Mode:

• Quantum Efficiency: 63.8%
• Max. SNR: 43.7 dB
• AST (p) 46.7
• Saturation Capacity (e-): 23183
• Temporal Dark Noise: 29.27 e-
• Dynamic Range: 57.8 dB:

Binned Mode is Mono Output Only

Exposure

Minimum Exposure:

• 1 µs (standard)
• 709 ns minimum exposure with

Global electronic shutter

Exposure Index (E.I.) for controlling apparent ISO

Auto Exposure

Shutter Off mode for PIV

Memory

18 GB, 36 GB, 72 GB high-speed internal RAM

On-board removable CFast 2.0 cards (S-models) up to 512GB

Record Times

4.7 seconds at maximum frame rate, largest resolution, and into maximum internal memory

Special Features

10Gb Ethernet (optional)

Binned mode for higher fps at 640 x 480 and below, mono output only

Segment memory for up to 63 cines in multi-cine mode

Continuous recording

Programmable I/O

HD-SDI and HDMI video

Event marking

Frame timestamp (IRIG SMPTE or MISP)

IRIG in/out (modulated and unmodulated)

Shutter off mode for PIV exposure

726 ns straddle time

Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)

Image-Based Auto-Trigger (IBAT)

One 12 VDC, 6W auxiliary power port

Secondary IP address with DHCP Support

Field-based firmware upgrades

Triggering

Programmable trigger location (pre/post trigger recording)

Image-Based Auto-Trigger

Trigger from software

Trigger from on-camera controls (S-model)

Hardware trigger BNC

High Voltage (HV) trigger compatible

Timing and
Synchronization

Frame synchronization to internal or external clock (FSYNC)

IRIG in/out (modulated or unmodulated)

Short Description

The VEO 1010 captures at over 8,420 frames-per-second at 1.2 Megapixel resolution.

Capture images with the highly sensitive custom CMOS sensor.

The VEO family offers features including programmable I/O, HDMI video, Canon EOS lens support and optional CFast 2.0 recording media.

Available in both L and S styles.

Throughput / Speed

10 Gpx/sec

Max speed at full resolution of 1280 x 960 is 8,420 fps

Max speed at reduced resolution 328,420 fps (320 x 12 standard and 320 x 24 binned mode)

Minimum frame rate of 50 fps

Video Out

3G HD-SDI and HDMI on all VEO models

Additional 3G HD-SDI BNC port on back of S-model

Supports up to 1080p60

Lensing

Nikon F-mount standard, supports F & G style lenses

Canon EOS mount optional

PL-mount optional

C-mount optional

(lens not included)

Video Processing

Brightness

Gain

Gamma

Saturation

White Balance

Pedestal

Tone curve

Filters

Color matrix

Image flip and rotate

Crop

Scale

Data Acquisition

National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

• Basic measurements via Phantom Application:
  • Distance
  • Speed
  • Acceleration
  • Angles and Angular Speed
  • Manual and Automatic point collection for target tracking
  • Compatible with 3rd party solutions

Supported File
Formats

Cine RAW & Cine Compressed

AVI, h.264 mp4

Apple ProRes .mov

Multipage TIFF

MXF PAL & MXF NTSC

Uncompressed QuickTime

Windows BMP

OS/2 BMP, PCX, TGA

TIFF, LEAD, JPEG

JTIF, RAW, DNG, DPX

Power

100 - 240 VAC, 16-32 VDC via primary power input

80 Watt 24V power supply included

Secondary power input, down to 12V via capture port on S-model cameras

Environmental
Specifications

Operating Temperature: -10°C - +50°C

Storage Temperature: -20°C - +70°C

Shock:MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total)

Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)

Mechanical
Specifications

Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm (L-model)

Weight: 6 lbs (2.7 kg) (L-model); 6.6 lbs (3.0 kg) (S-model)

APIs

Phantom SDK

LabView

MatLab

Ships Standard
With

Power supply

Ethernet cable

SDI DIN Cable

Phantom PCC software

Getting Started Guide

Options

Canon EOS lens mount

PL-mount

C-mount

Signaling

Dedicated Trigger and Timecode In BNCs on camera body

Range Data input on S-model camera body (Fischer)

Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more

Popular Accessories

Handle

Cheese Plate

Battery mounts (S-models)

Case with custom foam

Camera Control

On-Camera Controls (OCC) on S-model camera

Phantom Camera Control (PCC)

SDK available

Connectivity

Gb Ethernet (standard)

10Gb Ethernet (optional)

For control and data downloads:

Fischer port on S-models

RJ45 port on L-models