Sensor Specifications

CMOS sensor

1280 x 960 pixels

18 µm pixel size

23 mm x 17.3 mm

12-bit depth

Sensor incorporates correlated double sampling (CDS)

CAR in 640 x 12 increments

EMVA 1288 measurements at 532nm

Standard Mode:

• Quantum Efficiency: 71.6% mono; 53.3% color
• Max. SNR: 40.7 dB
• AST (p) 19.8 mono; 24.2 color
• Saturation Capacity (e-): 11700 mono; 21024 color
• Temporal Dark Noise: 13.65 e-
• Dynamic Range: 58.3 dB

Binned Mode:

• Quantum Efficiency: 63.8%
• Max. SNR: 43.7 dB
• AST (p) 46.7
• Saturation Capacity (e-): 23183
• Temporal Dark Noise: 29.27 e-
• Dynamic Range: 57.8 dB:

Binned Mode is Mono Output Only

Exposure

Minimum Exposure:

• 1 µs (standard)
• 709 ns minimum exposure with FAST option (export controlled)

Global electronic shutter

Exposure Index (E.I.) for controlling apparent ISO

Auto Exposure

Shutter Off mode for PIV

Memory

18 GB, 36 GB, 72 GB high-speed internal RAM

On-board removable CFast 2.0 cards (S-models) up to 512GB

Record Times

7 seconds at maximum frame rate, largest resolution, and into maximum internal memory

Special Features

10Gb Ethernet (optional)

Binned mode for higher fps at 640 x 480 and below, mono output only

Segment memory for up to 63 cines in multi-cine mode

Continuous recording

Programmable I/O

HD-SDI and HDMI video

Event marking

Frame timestamp (IRIG SMPTE or MISP)

IRIG in/out (modulated and unmodulated)

Shutter off mode for PIV exposure

726 ns straddle time

Standard Internal mechanical shutter for automatic/remote Current Session Reference (CSR)

Image-Based Auto-Trigger (IBAT)

One 12 VDC, 6W auxiliary power port

Secondary IP address with DHCP Support

Field-based firmware upgrades

Triggering

Programmable trigger location (pre/post trigger recording)

Image-Based Auto-Trigger

Trigger from software

Trigger from on-camera controls (S-model)

Hardware trigger BNC

High Voltage (HV) trigger compatible

Short Description

The VEO 610 offers exceptional sensitivity at up-to 5,610 frames-per-second at 1.2 Megapixel resolution.

Includes programmable I/O, HDMI video, Canon EOS lens support and optional CFast 2.0 recording media. T

Can be upgraded to the VEO 1010 or 1310 in the future for higher frame rates.

Throughput / Speed

6.75 Gpx/sec

Max speed at full resolution of 1280 x 960 is 5,610 fps

Max speed at reduced resolution 218,970 fps (640 x 12 standard and 320 x 24 binned mode)

Minimum frame rate of 50 fps

Video Out

3G HD-SDI and HDMI on all VEO models

Additional 3G HD-SDI BNC port on back of S-model

Supports up to 1080p60

Lensing

Nikon F-mount standard, supports F & G style lenses

Canon EOS mount optional

PL-mount optional

C-mount optional

(lens not included)

Video Processing

Brightness

Gain

Gamma

Saturation

White Balance

Pedestal

Tone curve

Filters

Color matrix

Image flip and rotate

Crop

Scale

Data Acquisition

National Instruments M- and X-Series DAQ modules with integrated support in PCC

Motion Analysis

Basic measurements via Phantom Application:

• Distance
• Speed
• Acceleration
• Angles and Angular Speed
• Manual and Automatic point collection for target tracking
• Compatible with 3rd party solutions

Supported File
Formats

Cine RAW & Cine Compressed

AVI, h.264 mp4

Apple ProRes .mov

Multipage TIFF

MXF PAL & MXF NTSC

Uncompressed QuickTime

Windows BMP

OS/2 BMP, PCX, TGA

TIFF, LEAD, JPEG

JTIF, RAW, DNG, DPX

Power

100 - 240 VAC, 16-32 VDC via primary power input

80 Watt 24V power supply included

Secondary power input, down to 12V via capture port on S-model cameras

Environmental
Specifications

Operating Temperature: -10°C - +50°C

Storage Temperature: -20°C - +70°C

Shock:MIL-STD-202G Method 213-B. Rated 30G with shutter; 100G without shutter; sawtooth wave, 11ms, +/- 10 pulses all axes (60 total)

Vibration: Rated 12Grms; Figure 2A-1, Test Condition D, 15 min per axis (without lenses)

Mechanical
Specifications

Size (without lens): 5.0 x 5.0 x 5.0 inches (L x W x H); 12.7 x 12.7 x 12.7 cm (L-model)

Weight: 6 lbs (2.7 kg) (L-model); 6.6 lbs (3.0 kg) (S-model)

APIs

Phantom SDK

LabView

MatLab

Ships Standard
With

Power supply

Ethernet cable

SDI DIN Cable

Phantom PCC software

Getting Started Guide

Options

Canon EOS lens mount

PL-mount

C-mount

Signaling

Dedicated Trigger and Timecode In BNCs on camera body

Range Data input on S-model camera body (Fischer)

Programmable I/O ports includes adjustable (assign and define) signals including F-sync, strobe, event, trigger output, ready and more

Popular Accessories

Handle

Cheese Plate

Battery mounts (S-models)

Case with custom foam

Camera Control

On-Camera Controls (OCC) on S-model camera

Phantom Camera Control (PCC)

SDK available

Connectivity

Gb Ethernet (standard)

10Gb Ethernet (optional)

For control and data downloads:

Fischer port on S-models

RJ45 port on L-models

Timing and
Synchronization

Frame synchronization to internal or external clock (FSYNC)

IRIG in/out (modulated or unmodulated)